View MDF12A-TA1822HC_72857.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Crimping Contact Directly Mounted on Board
MDF12,MDF27 Series
sFeatures
1. Cable Direct Mounting Service Improved
The existing cable core soldered directly on the board is remade into the crimping contact, which can enhance the service efficiency and the reliability. q Achieves pre-soldering fixation according to the board pre-fixed style, and enhances the service efficiency. q Accepts a load to the cable at the contact, and prevents contact wire cutting.
2. Cable Lateral Unreeling Possible
The cable can be unreeled lateral to the board by using the angle type MDF27.
3. Current Capacity Secured Corresponding to Thick Cable
The cable size corresponds to AWG22 to 14, while AWG14 secures 15A current capacity. In addition, since the contacts are provided corresponding to UL1007 and UL1015 jackets, the contact can be chosen according to applications.
sApplications
Various kinds of electronic equipment power supplies, etc.
B194
sProduct Specifications
Current rating Note 1 Rating AWG 14 : 15A AWG 16 : 10A AWG 18 : 9A AWG 20 : 5A AWG 22 : 5A Voltage rating Item 1. Contact Resistance 2. Vibration 4. Temperature Cycle 5. Resistance to Soldering heat 15m ohms max. No damage, cracks, or parts looseness. No damage, cracks, or parts looseness. No deformation of components affecting performance. Specification 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes-> 5 to 35c: 10 minutes-> 85c: 30 minutes-> 5 to 35c: 10 minutes) 5cycles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds
300V AC
Operating Temperature Range Operating Moisture Range Storage Temperature Range Storage Moisture Range
-35 to +85c(Note 2) -20 to 80% -10 to +60c -40 to 70%
Condition
3. Humidity (Steady state) No damage, cracks, or parts looseness.
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Crimping Contact for Plug Part Terminal Material Brass Finish Tin plated
Note : The whisker method is implemented for the tin plating.
sOrdering Information
qContact
MDF 12 A - 1822 PCF
q q Series Name: MDF w Series No. 12: Vertical type 27: Horizontal type e Cable Type Blank A : UL1007 : UL1015 w e r t r Applicable Cable Size 1822: AWG18 to 22 1416: AWG14 to 16 t Packaging Type PCF PC : Plug contact / reel : Plug contact / bag
B195
sMDF12 Series
Part Number MDF120-1822PCF MDF120-1822PC CL No. 547-0196-9 547-0221-4 Applicable Cable AWG AWG 18 to AWG 22 Jacket Diameter 1.5mm to 2.2mm 2.1mm to 2.9mm AWG 14 to AWG 16 2.4mm to 2.7mm 2.6mm to 3.6mm 5,000 100 3,500 100 2,500 100 2,500 100 11.2 3.6 9.4 3.2 Packaging Type A Size B Size
MDF12A-1822PCF 547-0208-6 MDF12A-1822PC MDF120-1416PCF MDF120-1416PC 547-0222-7 547-0209-9 547-0223-0
MDF12A-1416PCF 547-0210-8 MDF12A-1416PC 547-0224-2
qApplicable Board Hole Diameter : O1.8+0.1 +0 qApplicable Board Thickness : 1.6
Note: AWG14-16
sMDF27 Series
Part Number MDF270-1822PCF MDF270-1822PC MDF27A-1822PCF MDF27A-1822PC MDF270-1416PCF MDF270-1416PC MDF27A-1416PCF MDF27A-1416PC CL No. 547-0286-0 ------- 547-0288-5 ------- 547-0294-8 ------- 547-0296-3 ------- Applicable Cable AWG AWG 18 to AWG 22 AWG 14 to AWG 16 Jacket Diameter 1.5mm to 2.2mm 2.1mm to 2.9mm 2.4mm to 2.7mm 2.6mm to 3.6mm
Packaging Type
5000 100 3500 100 2500 100 2500 100
qApplicable Board Thickness : 1.6
qPCB mounting pattern
qApplicable Cable (Tin Plating Annealed Copper Wire)
Conductor Size (Wire Construction) AWG 14 (41 cores./0.25mm) AWG 16 (41 cores./0.254mm) AWG 18 (34 cores./0.18mm) AWG 20 (21 cores./0.18mm) AWG 22 (17 cores./0.16mm)
qStrip Length
3.3 to 4.2mm
Note: If other cables are used instead of the applicable cable, contact Hirose sales department.
B196
BApplicable Crimping Tool
Type Part Number
AP105-MDF12-1822P AP105-MDF12A-1822P AP105-MDF12-1416P Applicator AP105-MDF12A-1416P AP105-MDF27-1822P AP105-MDF27A-1822P AP105-MDF27-1416P AP105-MDF27A-1416P Pres Main Unit CM-105 MDF12 -TA1822HC MDF12A-TA1822HC MDF12 -TA1416HC Manual Crimping Tool MDF12A-TA1416HC HT104/MDF27-1822P MDF27A-TA1822HC MDF27 -TA1416HC MDF27A-TA1416HC
CL No.
901-4514-0 901-4515-2
Applicable Contact
MDF12 -1822PCF MDF12A-1822PCF MDF12 -1416PCF MDF12A-1416PCF MDF27 -1822PCF MDF27A-1822PCF MDF27 -1416PCF MDF27A-1416PCF
----------
901-4533-4
---------- ---------- ---------- ----------
901-0005-4 550-0238-0 550-0239-2
--------------
MDF12 -1822PC MDF12A-1822PC MDF12 -1416PC MDF12A-1416PC MDF27 -1822PC MDF27A-1822PC MDF27 -1416PC MDF27A-1416PC
----------
550-0237-7
---------- ---------- ---------- ----------
Note 1. If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. Note 2. If products with no CL No. are ordered, consult HRS sales department.
BPrecautions
1. Recommended Soldering Condition (DIP) Flow: 250c for 3 seconds Manual soldering: 290c for 3 seconds s After the soldering process, if a load is applied to the cable where the connector and the cable contains heat, the jacket retaining area will be easily loosened. Be sure to carry out the postsoldering operation after the connector returns to the room temperature. 2. Cleaning Condition 3. Connection Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such as trichloroethane, which degrades the cable jacket.In addition, avoid heat cleaning by solvent. Refer to Nylon Connector Use Hand book.
B197

▲Up To Search▲

Price & Availability of MDF12A-TA1822HC

	To Download MDF12A-TA1822HC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .